Regviz

Cypress Semiconductor /psoc63 /SAR /AVG_STAT

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as AVG_STAT

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Cypress Semiconductor/psoc63/SAR/AVG_STAT#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0CUR_AVG_ACCU0 (INTRLV_BUSY)INTRLV_BUSY 0CUR_AVG_CNT

Description

Current averaging status (for debug)

Fields

CUR_AVG_ACCU

the current value of the averaging accumulator
INTRLV_BUSY

If high then the SAR is in the middle of Interleaved averaging spanning several scans. While this bit is high the Firmware should not make any changes to the configuration registers otherwise some results may be incorrect. Note that the CUR_AVG_CNT status register below gives an indication how many more scans need to be done to complete the Interleaved averaging. This bit can be cleared by changing the averaging mode to ACCUNDUMP or by disabling the SAR.
CUR_AVG_CNT

the current value of the averaging counter. Note that the value shown is updated after the sampling time and therefore runs ahead of the accumulator update.

Links

()

Register License

Copyright 2016-2018 Cypress Semiconductor Corporation \n Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License.
You may obtain a copy of the License at \n
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and
limitations under the License.

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data